Run AI plan check against specific codes or sections only: energy (IECC, California Title 24), internal QA checklists, or best practices, so you get targeted output instead of general coordination noise.
Full-scope AI plan checking covers every discipline, building codes, cross-discipline coordination, and spec vs. drawing conflicts. For commissioning firms, energy consultants, and specialty reviewers, the priority is often energy code compliance, energy savings opportunities, or a specific code or section, not every coordination issue. Narrowing the focus lets you get exactly the output you need without wading through hundreds of unrelated findings.
You can tell the AI what to check in two ways: use the prompt box when you upload (e.g. “Check against IECC,” “Check these codes,” “Focus on energy requirements only”) and upload your requirements as PDFs, QA checklists, energy guidelines, or code excerpts. The AI will check your project documents against those in addition to (or instead of) a full run, depending on what you ask for.
IECC (International Energy Conservation Code) and California Title 24 are common targets. If the code is available as a PDF, you can upload it so the AI checks against it. For codes already in our library (including IECC and many common editions), the AI can use them directly. For local amendments or project-specific requirements, upload the PDF and, if you use the same codes often, add them to your account library so you don't have to re-upload them on every job.
Same idea for submittals: upload the submittal and the design drawings, then in the prompt box say “Check the submittal against the drawings.” The AI will focus on that comparison. All uploads must be PDF (export Excel or Word to PDF first).
Get findings for energy, specific codes, or your QA checklist, not generic coordination only.
Upload IECC, Title 24, local amendments, or internal guidelines; prompt for the sections you care about.
Add code or checklist PDFs to your library once and reuse on every project.
Each issue links to the exact drawing/spec and code or requirement, no blind trust.
Know the cost and the output before you upload.See pricingSee a sample report
