Upload civil drawings and geotechnical reports (rock locations, contaminated soils, water, lengthy reports) as PDFs. The AI compares them—same per-sheet pricing. Self-perform site work teams use this to catch conflicts before construction.
Geotechnical reports are often lengthy and detail where rock is located, contaminated soils, water conditions, and design recommendations. Civil drawings must align with those findings—footing depths, excavation zones, erosion control, and grading. When civil and geotech don't match, you get RFIs, change orders, and field surprises. AI can read both the civil set and the geotechnical report (and other PDFs) and flag conflicts: e.g. foundations in zones the geotech said need special treatment, or elevations that don't match the report.
Same per-sheet pricing: Drawing sheets are about $1 each; spec and report pages (including long geotechnical reports) are $0.25 each. So even a 1,000-page geotech report is $250 to check. Upload everything with your project PDFs and the AI will compare across all of it.
Conflicts between civil design and geotech recommendations for rock locations, contaminated soils, and water conditions.
Vertical busts, tie-in elevations, and grading that don't align with the geotechnical report or between civil sheets.
Structural foundation design that doesn't meet geotech minimums or bearing capacity requirements.
Each finding links to the exact page in the civil set or geotechnical report—no blind trust.
Upload your civil drawings and geotechnical reports as PDFs. Same per-sheet pricing; catch conflicts before construction.
5+ issues or full refund · No demo required
Sample report: 282 issues found|Pricing after first check
155,000+ customer-visible issues across 2,000+ customer accounts
